SPAGUARD ANTI FOAM quickly eliminates and prevents foaming in spas, hot tubs and swimming pools

Measurement and Dosing:

Use all level measurements. 1/2 fl oz per 600 gallons; 1 teaspoon per 200 gallons

Directions for use:

1. Add 1/2 oz. of SpaGuard Anti Foam per 600 gallons of water or 1 teaspoon per 200 gallons.
2. Pour directly into water with pump running.
3. The amount of SpaGuard Anti Foam required depends on the nature and quantity of foam present.
4. If foaming persists repeat this dose as needed to control foaming.

NOTE: Soaps or detergents may cause excessive foaming requiring large quantities of this product.

SPA MAINTENANCE TIPS: 

1. Test spa water a minimum of once per week
2. Maintain pH between 7.2 and 7.6
3. Keep total alkalinity at 100-150 ppm, and calcium hardness between 100-200 ppm
4. Drain, clean and refill residential spas and hot tubs every 90 days, or according to manufacturer's recommendations
5. Use BioGuard Off the Wall surface cleaner to clean spa surfaces
6. Rinse filters and use SpaGuard Filter Cleaner once every 30 days