1 - 1/2 Gallon of Softswim B

What it does

Controls bacteria growth in biguanide sanitized pools.

Features

• 20% Polyhexamethylene biguanide hydrochloride (PHMB)
• pH~7.5
• Compatible with SoftSwim^® systems
• Do not use in chlorine, bromine, Mineral Springs^® or saltwater systems
• Polymeric action attracts contaminants
• Easy to use and measure as a liquid
• Effective over wide pH range
• pH neutral
• Non-staining, Non-corrosive
• Stable in sunlight
• Designed to be used with hydrogen peroxide as oxidizer

Benefits

• Convenient and simple application
• Water is gentle feeling to skin and eyes
• No chlorine odor or dry feeling after swimming
• Excellent aid to filtration

Directions for Use

Initial Treatment

1. Backwash or chemically clean pool filter. Check pool pH; adjust to 7.2-7.6 if necessary.
2. Add SoftSwim^® B to give a content of 50 ppm (1/2 gallon product/10,000 gallons of pool water).
3. After 24 hours, check pH and SoftSwim^® B concentration with test strips and adjust if necessary.

Routine Maintenance

1. Every week, check SoftSwim^® B concentration and pH.
2. Maintain SoftSwim^®B concentration at about 50 ppm. If concentration falls 10 ppm or more, add a top-up dose. The level should not be allowed to drop below 30 ppm.
   • A maintenance dose of 1 pint per 10,000 gallons will raise the level approximately 10 ppm.

NOTE: SOFTSWIM^® B AND CHLORINE ARE INCOMPATIBLE. Consult your Authorized BioGuard^® Dealer for information on how to deal with accidental chlorination.