1 Quart - Softswim Filter Cleaner

What it does

Specially designed to clean filters for SoftSwim^® pools.

Features

• Phosphoric acid 5-10%*
• Hydrochloric acid <5%
• pH <2
• Effectively cleans all filter types
• Designed especially for use with SoftSwim^® systems

Benefits

• Cleans filter media to allow more effective filtration
• Helps keep water clear by promoting better filtration

*The exact percentage (concentration) of composition has been withheld as a trade secret

Sand and Most D.E. Filters

1. Backwash thoroughly. Turn pump off.
2. For most effective results, remove lid from lint pot and pour 1 quart of this product into the pot.
   • If this is not possible, pour the product into the skimmer closest to the filter.
3. With filter in backwash position, turn pump on for 5-10 seconds or until a slight pink color is seen in site glass or filter discharge.
4. Turn pump off and turn valve to the closed position, if available. Let filter cleaner soak for 12-24 hours before backwashing.
5. Backwash filter for at least 2 minutes or until site glass or filter discharge water is clear of color, dirt, and debris.
6. Rinse and return to normal operation.

Non Backwashable D.E. and Cartridge Filter

1. Turn pump off.
2. Remove elements from filter and rinse off debris with a high pressure hose.
3. Immerse completely and soak 12-24 hours in a clean plastic bucket containing 1 quart of this product in 5 gallons of water for small filter elements or 2 quarts of this product in 10 gallons of water for large filter elements.
4. Clean and rinse thoroughly with water using a high pressure hose.
5. Replace elements and resume normal operation.
   • For best performance, allow D.E. filter septum or cartridge element to completely dry before replacement.